3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter
2026. 11. 17.
273

AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter

2 min read

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

Eight materials, eight separate nozzles

The Kickstarter campaign launched on November 12, 2026, highlighting a broader move toward dedicated-head architectures in multicolor FFF printing. AXILOOP MC8 can keep eight materials loaded, each in its own toolhead. The manufacturer advertises approximately four-second exchanges while unused tools remain preheated.

Separate nozzles can reduce contamination and the purging associated with shared-nozzle color changes. However, managing eight heads adds calibration, thermal and maintenance challenges. Longer real-world prints will be needed to establish whether the campaign demonstrations reflect normal use.

Hardware and model differences

Both versions offer a 300 × 300 × 300 mm build volume. AXILOOP specifies up to 300 mm/s printing speed and 600 mm/s travel. The machine is described as having 2,500-point eddy-current bed probing, automatic tool-offset correction, a 1080p camera and 45 sensors. Maximum nozzle temperature is quoted as 300°C.

The open MC8 is aimed at PLA, PETG, TPU and PVA. The enclosed MC8 Pro adds active chamber heating, HEPA and activated-carbon filtration, with support claimed for ABS, ASA, PA, PC and fiber-filled polymers. Differences in bed adhesion and thermal expansion still matter when combining materials.

Crowdfunding conditions and risk

Announced Super Early Bird levels start at $1,099 for MC8 and $1,499 for MC8 Pro. AXILOOP targets March 2027 for first shipments, and the campaign is scheduled to run through December 27. These are pledge conditions, not ordinary in-stock retail prices; shipping, taxes and delivery schedules can change.

Alongside Quadro and Bambu H3C, 3DPS would focus on the repeatability of tool offsets, measured filament waste, firmware sustainability and spare-parts availability. The advertised results should not be mistaken for independent test measurements.

Sources and further information

Original manufacturer source image (AXILOOP): https://www.axiloop3d.com/素材/01.webp

Related articles
Archive

Earlier news

110 earlier article(s)
CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6
Technology
2 032

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

China’s ChangXin Memory Technologies (CXMT) is becoming a serious DRAM competitor: its DDR5 memory is appearing in desktop and server systems, while in September 2026 the company also announced mass production of LPDDR6.

2026. 09. 10.
Read
KPI features have been added.
Technology
1 941

KPI features have been added.

KPI features have been added. CALIBRA – Measurem Why do KPIs matter in measurement equipment management? Because data becomes truly useful only when it helps you see where attention is needed and how performance changes over time.

2026. 08. 24.
Read
CALIBRA – A Free Measurement Equipment Management System Is Under Development
Technology
1 804

CALIBRA – A Free Measurement Equipment Management System Is Under Development

CALIBRA – A Free Measurement Equipment Management System Is Under Development A new in-house developed web application is joining the growing collection of 3DPS projects. CALIBRA is being developed as a modern, transparent and expandable measurement equipment and calibration management system. Development has progressed rapidly from the original concept to an already functioning web application, with the foundations of company management, equipment tracking, external partner management and auditing now in place.

2026. 08. 11.
Read
Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions
Technology
1 926

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

2026. 08. 04.
Read
Parkside Multi Charger – New Development Milestone
Technology
1 691

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

2026. 08. 02.
Read