3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
QIDI Q3D: Dual Nozzles and Air-Cooled Extrusion Debut at Formnext 2026
2026. 11. 16.
331

QIDI Q3D: Dual Nozzles and Air-Cooled Extrusion Debut at Formnext 2026

3 min read

QIDI is teasing the Q3D for Formnext 2026, highlighting dual nozzles, air-cooled extrusion and real-time temperature readouts. Full specifications remain under wraps.

QIDI teases a dual-nozzle 3D printer

The QIDI Q3D is an upcoming 3D printer that the company is teasing ahead of Formnext 2026 in Frankfurt. An earlier manufacturer post announced a dual-nozzle design aimed at greater printing flexibility. Its latest graphic highlights air cooling for the extrusion system and a real-time temperature display.

Potential advantages of a dual-nozzle architecture include working with two colors or materials, or separating support material from the printed part. However, these are potential use cases rather than verified Q3D features: switching mechanisms, material compatibility and the actual extruder configuration have not been fully disclosed.

Unmodified QIDI Q3D manufacturer teaser showing extruder air cooling and two 35 °C temperature readouts
QIDI's original product teaser depicts an air-cooling concept and two 35 °C temperature readouts. Image used unchanged.

Why cool the extrusion system?

In an FDM/FFF printer, the nozzle must be hot enough to melt the polymer, while the filament feed path and the cold side of the hotend need to remain relatively cool. Excess heat creeping upward along the filament path can soften filament before it reaches the intended melt zone. That can lead to inconsistent feeding, jams and clogs — particularly during extended prints or operation in a heated chamber.

The Q3D teaser uses the words “Air Cooling. Extrusion fully under control. Real-time temperature display.” Its cutaway-style graphic shows an air path aimed at the extrusion system. This is significant because cooling the extruder's cold side is not the same thing as cooling the printed layers.

QIDI already documents a separate Polar Cooler product for cooling the extruder cold side and filament feed path. There is no confirmed information that the Q3D uses that exact unit; its cooling arrangement could differ.

What do the 35 °C labels tell us?

The teaser shows 35 °C twice, alongside the labels “E” and “L”. The company has not clarified the exact sensor locations, measurement conditions, control range or whether those readings represent stable performance under load. We therefore treat them as illustrative displayed readings, not a guaranteed temperature specification.

Real-time visibility into extrusion-system temperatures could be useful for diagnosing heat-related feed problems. However, QIDI has yet to confirm whether these readings will drive automated cooling control, alarms or other protective functions.

Five technical questions for the launch

  • Dual nozzles: how are nozzles switched, and are their temperature and material capabilities identical?
  • Filament feeding: what is the arrangement of extruders, feed paths and motors?
  • Cooling: is the air-cooling solution integrated or external, and how does it perform in a heated chamber?
  • Monitoring: where are “E” and “L” measured, and does the temperature display provide closed-loop control?
  • Product details: what are the build volume, pricing and availability?

Formnext 2026: where and when

QIDI plans to reveal more about the Q3D at Formnext 2026, November 17–20, at Messe Frankfurt, Hall 12.1, Booth E01. At the time of this preview, the complete official specification sheet and retail pricing had not been published.

3DPS perspective: pairing dual nozzles with more careful extrusion thermal management could be useful for engineering-material workflows. Whether this offers a measurable advantage will depend on testing for temperature stability, clog resistance, material changes, print quality and long-term reliability. A teaser image is not a substitute for technical specifications or independent benchmarks.

Sources: QIDI air-cooling teaser (November 15, 2026); earlier dual-nozzle teaser (November 12); QIDI Polar Cooler documentation; Formnext exhibitor list. The illustration is an unmodified manufacturer graphic supplied for this article.

Related articles
Archive

Earlier news

109 earlier article(s)
CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6
Technology
1 983

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

China’s ChangXin Memory Technologies (CXMT) is becoming a serious DRAM competitor: its DDR5 memory is appearing in desktop and server systems, while in September 2026 the company also announced mass production of LPDDR6.

2026. 09. 10.
Read
KPI features have been added.
Technology
1 907

KPI features have been added.

KPI features have been added. CALIBRA – Measurem Why do KPIs matter in measurement equipment management? Because data becomes truly useful only when it helps you see where attention is needed and how performance changes over time.

2026. 08. 24.
Read
CALIBRA – A Free Measurement Equipment Management System Is Under Development
Technology
1 749

CALIBRA – A Free Measurement Equipment Management System Is Under Development

CALIBRA – A Free Measurement Equipment Management System Is Under Development A new in-house developed web application is joining the growing collection of 3DPS projects. CALIBRA is being developed as a modern, transparent and expandable measurement equipment and calibration management system. Development has progressed rapidly from the original concept to an already functioning web application, with the foundations of company management, equipment tracking, external partner management and auditing now in place.

2026. 08. 11.
Read
Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions
Technology
1 854

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

2026. 08. 04.
Read
Parkside Multi Charger – New Development Milestone
Technology
1 623

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

2026. 08. 02.
Read
Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard
New printers
1 547

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

Anycubic Kobra 3 Toolhead Project – Another Milestone: Successful Firmware Backup and Preparing for a CAN-Based Toolboard Today marked another major milestone in the Anycubic Kobra 3 Toolhead project. Our objective is not to modify or preserve the original firmware. Instead, we are developing a completely custom firmware that will transform the factory controller board into a Klipper-compatible CAN Tool MCU with only minimal hardware modifications.

2026. 07. 27.
Read