3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter
2026. 11. 17.
274

AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter

2 min read

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

Eight materials, eight separate nozzles

The Kickstarter campaign launched on November 12, 2026, highlighting a broader move toward dedicated-head architectures in multicolor FFF printing. AXILOOP MC8 can keep eight materials loaded, each in its own toolhead. The manufacturer advertises approximately four-second exchanges while unused tools remain preheated.

Separate nozzles can reduce contamination and the purging associated with shared-nozzle color changes. However, managing eight heads adds calibration, thermal and maintenance challenges. Longer real-world prints will be needed to establish whether the campaign demonstrations reflect normal use.

Hardware and model differences

Both versions offer a 300 × 300 × 300 mm build volume. AXILOOP specifies up to 300 mm/s printing speed and 600 mm/s travel. The machine is described as having 2,500-point eddy-current bed probing, automatic tool-offset correction, a 1080p camera and 45 sensors. Maximum nozzle temperature is quoted as 300°C.

The open MC8 is aimed at PLA, PETG, TPU and PVA. The enclosed MC8 Pro adds active chamber heating, HEPA and activated-carbon filtration, with support claimed for ABS, ASA, PA, PC and fiber-filled polymers. Differences in bed adhesion and thermal expansion still matter when combining materials.

Crowdfunding conditions and risk

Announced Super Early Bird levels start at $1,099 for MC8 and $1,499 for MC8 Pro. AXILOOP targets March 2027 for first shipments, and the campaign is scheduled to run through December 27. These are pledge conditions, not ordinary in-stock retail prices; shipping, taxes and delivery schedules can change.

Alongside Quadro and Bambu H3C, 3DPS would focus on the repeatability of tool offsets, measured filament waste, firmware sustainability and spare-parts availability. The advertised results should not be mistaken for independent test measurements.

Sources and further information

Original manufacturer source image (AXILOOP): https://www.axiloop3d.com/素材/01.webp

Related articles
Archive

Earlier news

110 earlier article(s)
Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard
New printers
1 626

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

Anycubic Kobra 3 Toolhead Project – Another Milestone: Successful Firmware Backup and Preparing for a CAN-Based Toolboard Today marked another major milestone in the Anycubic Kobra 3 Toolhead project. Our objective is not to modify or preserve the original firmware. Instead, we are developing a completely custom firmware that will transform the factory controller board into a Klipper-compatible CAN Tool MCU with only minimal hardware modifications.

2026. 07. 27.
Read
Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2
New printers
1 611

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project The Anycubic Kobra 3 Toolhead reverse engineering project has reached another important milestone. Recent work has shifted beyond simply identifying components toward building a comprehensive and structured hardware documentation system that will serve as the foundation for all future development.

2026. 07. 26.
Read
Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed
New printers
1 613

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed The reverse engineering project has reached another important milestone. Our recent work has focused not only on identifying individual components but also on building a structured hardware documentation system that will serve as the foundation for mapping the entire electronics assembly.

2026. 07. 26.
Read
„DO NOT TOUCH.” 😅
Technology
1 312

„DO NOT TOUCH.” 😅

There’s that legendary sticker on every engineering project that says: “DO NOT TOUCH.” 😅 But seriously… then HOW are we supposed to take it apart?!

2026. 05. 12.
Read
Bambu Lab A1 and A1 Mini – Factory First Layer Issues
New printers
1 496

Bambu Lab A1 and A1 Mini – Factory First Layer Issues

Bambu Lab A1 and A1 Mini – Factory First Layer Issues Several users of the Bambu Lab A1 and Bambu Lab A1 Mini printers have reported strange first layer issues that at first seem like slicer or filament problems, but are often actually caused by mechanical issues.

2026. 05. 12.
Read
E-Boat Motor – Remote Control Lever Project
Technology
1 345

E-Boat Motor – Remote Control Lever Project

E-Boat Motor – Remote Control Lever Project Electric boat motors are becoming increasingly popular thanks to their quiet operation, efficiency, and environmentally friendly nature compared to traditional propulsion systems. However, as performance and areas of use continue to expand, comfortable and safe control solutions are becoming more and more important as well.

2026. 05. 12.
Read
Discover the endless possibilities of the 3D world
Technology
1 335

Discover the endless possibilities of the 3D world

Discover the endless possibilities of the 3D world From idea to reality: At 3DayCon you can experience first-hand how 3D technology is reshaping the world. Whether it's a hobby or industrial innovation, you'll find what you're looking for here. The event is free, but registration is required!

2026. 05. 07.
Read
Bringing 3D Printing and Smiles to Children’s Day in Budapest
Technology
1 440

Bringing 3D Printing and Smiles to Children’s Day in Budapest

Bringing 3D Printing and Smiles to Children’s Day in Budapest For the third consecutive year, our team has proudly participated in the Városliget Children’s Day event organized by the International Children’s Safety Service. During the 2024, 2025, and 2026 events, we have been dedicated to bringing exciting technology experiences to children and families visiting one of Hungary’s largest free family festivals.

2026. 05. 06.
Read