3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
HONOR enters 3D printing: Six-nozzle S01 shown at Formnext 2026
2026. 11. 20.
454

HONOR enters 3D printing: Six-nozzle S01 shown at Formnext 2026

3 min read

Smartphone maker HONOR has shown the six-nozzle S01 FDM 3D printer at Formnext 2026. Watch the first video and see which details are confirmed—and which remain unknown.

An unexpected new name has appeared in desktop 3D printing. HONOR, best known for smartphones and consumer electronics, has displayed the S01, a six-nozzle FDM 3D printer, at Formnext 2026 in Frankfurt. A short on-site video published by the gerGO PRINT 3D channel provides an early look at the machine.

From smartphones to 3D printers

HONOR is widely associated with phones and connected consumer devices. Its appearance in the desktop 3D printing market is therefore noteworthy, especially with a machine that places multiple nozzles at the centre of its design. The S01 was publicly shown during Formnext, held in Frankfurt from November 17 to 20, 2026.

The key confirmed detail so far is the six-nozzle FDM configuration. It suggests a focus on multicolor and potentially multimaterial printing, although the exact implementation and supported workflows still require documentation from the manufacturer.

Why six nozzles matter

One potential advantage of multiple nozzles is reduced color-purging waste compared with shared-nozzle filament-switching systems. For models involving frequent color changes, that could also save print time.

There is an important distinction: the presence of six nozzles does not, by itself, establish that the S01 uses six fully independent toolheads or a particular tool-changing mechanism. At this stage, details about nozzle selection, parking, ooze prevention, cross-nozzle calibration and compatible material combinations have not been independently established.

Video: HONOR S01 at Formnext 2026

The following on-site Short from gerGO PRINT 3D offers a first look at HONOR's newly displayed machine:

Watch the original HONOR S01 YouTube Short

Which specifications remain unknown?

Neither the short video metadata nor the available event reporting establishes a complete, verified specification sheet. Important open questions include:

  • build volume, motion speed, acceleration and temperature limits;
  • how the six-nozzle mechanism works, its switching time and calibration system;
  • supported materials and slicing software integration;
  • bed leveling, maintenance and long-term operating reliability;
  • retail pricing, launch timing, European distribution and after-sales support.

A Chinese industry report published on November 20, 2026 states that the S01 was not yet at its final commercial launch stage, with no confirmed retail price or release schedule announced at the show.

3DPS perspective: another entrant in the multicolor race

HONOR's appearance is notable as desktop multicolor FDM printing becomes more competitive. Existing approaches range from filament switching through a single nozzle to removable toolheads and multi-nozzle architectures. If HONOR can turn its six-nozzle concept into a reliable, accessible product, the S01 could become an interesting new competitor. Its real value will depend on technical documentation, independent testing and the final production model.

What is established: HONOR showed the six-nozzle FDM S01 at Formnext 2026. What is not yet established: the precise nozzle architecture, retail pricing and availability.

Sources

Related articles
Archive

Earlier news

112 earlier article(s)
Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions
Technology
2 058

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

2026. 08. 04.
Read
Parkside Multi Charger – New Development Milestone
Technology
1 833

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

2026. 08. 02.
Read
Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard
New printers
1 766

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

Anycubic Kobra 3 Toolhead Project – Another Milestone: Successful Firmware Backup and Preparing for a CAN-Based Toolboard Today marked another major milestone in the Anycubic Kobra 3 Toolhead project. Our objective is not to modify or preserve the original firmware. Instead, we are developing a completely custom firmware that will transform the factory controller board into a Klipper-compatible CAN Tool MCU with only minimal hardware modifications.

2026. 07. 27.
Read
Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2
New printers
1 760

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project The Anycubic Kobra 3 Toolhead reverse engineering project has reached another important milestone. Recent work has shifted beyond simply identifying components toward building a comprehensive and structured hardware documentation system that will serve as the foundation for all future development.

2026. 07. 26.
Read
Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed
New printers
1 769

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed The reverse engineering project has reached another important milestone. Our recent work has focused not only on identifying individual components but also on building a structured hardware documentation system that will serve as the foundation for mapping the entire electronics assembly.

2026. 07. 26.
Read
„DO NOT TOUCH.” 😅
Technology
1 406

„DO NOT TOUCH.” 😅

There’s that legendary sticker on every engineering project that says: “DO NOT TOUCH.” 😅 But seriously… then HOW are we supposed to take it apart?!

2026. 05. 12.
Read
Bambu Lab A1 and A1 Mini – Factory First Layer Issues
New printers
1 670

Bambu Lab A1 and A1 Mini – Factory First Layer Issues

Bambu Lab A1 and A1 Mini – Factory First Layer Issues Several users of the Bambu Lab A1 and Bambu Lab A1 Mini printers have reported strange first layer issues that at first seem like slicer or filament problems, but are often actually caused by mechanical issues.

2026. 05. 12.
Read
E-Boat Motor – Remote Control Lever Project
Technology
1 465

E-Boat Motor – Remote Control Lever Project

E-Boat Motor – Remote Control Lever Project Electric boat motors are becoming increasingly popular thanks to their quiet operation, efficiency, and environmentally friendly nature compared to traditional propulsion systems. However, as performance and areas of use continue to expand, comfortable and safe control solutions are becoming more and more important as well.

2026. 05. 12.
Read