3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter
2026. 11. 17.
262

AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter

2 min read

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

Eight materials, eight separate nozzles

The Kickstarter campaign launched on November 12, 2026, highlighting a broader move toward dedicated-head architectures in multicolor FFF printing. AXILOOP MC8 can keep eight materials loaded, each in its own toolhead. The manufacturer advertises approximately four-second exchanges while unused tools remain preheated.

Separate nozzles can reduce contamination and the purging associated with shared-nozzle color changes. However, managing eight heads adds calibration, thermal and maintenance challenges. Longer real-world prints will be needed to establish whether the campaign demonstrations reflect normal use.

Hardware and model differences

Both versions offer a 300 × 300 × 300 mm build volume. AXILOOP specifies up to 300 mm/s printing speed and 600 mm/s travel. The machine is described as having 2,500-point eddy-current bed probing, automatic tool-offset correction, a 1080p camera and 45 sensors. Maximum nozzle temperature is quoted as 300°C.

The open MC8 is aimed at PLA, PETG, TPU and PVA. The enclosed MC8 Pro adds active chamber heating, HEPA and activated-carbon filtration, with support claimed for ABS, ASA, PA, PC and fiber-filled polymers. Differences in bed adhesion and thermal expansion still matter when combining materials.

Crowdfunding conditions and risk

Announced Super Early Bird levels start at $1,099 for MC8 and $1,499 for MC8 Pro. AXILOOP targets March 2027 for first shipments, and the campaign is scheduled to run through December 27. These are pledge conditions, not ordinary in-stock retail prices; shipping, taxes and delivery schedules can change.

Alongside Quadro and Bambu H3C, 3DPS would focus on the repeatability of tool offsets, measured filament waste, firmware sustainability and spare-parts availability. The advertised results should not be mistaken for independent test measurements.

Sources and further information

Original manufacturer source image (AXILOOP): https://www.axiloop3d.com/素材/01.webp

Related articles
Archive

Earlier news

110 earlier article(s)
Trump T1: Made in America?! When the American Dream Arrives as a Gold-Painted HTC
Curiosities & Astonishing Stories
1 648

Trump T1: Made in America?! When the American Dream Arrives as a Gold-Painted HTC

American manufacturing. American values. American pride. That was the story behind the Trump Mobile T1 smartphone. But when iFixit examined the device, the gold-colored exterior revealed something surprisingly familiar: hardware virtually identical to the HTC U24 Pro released in 2024. So what exactly are customers buying — American engineering or a carefully packaged political marketing message?

2026. 10. 29.
Read