News

News / article

Research

← Back to news Back to homepage

2026. 10. 17.

RMIT Researchers Demonstrate Floating Titanium Lattice

1 min read

Australian researchers demonstrated a 3D-printed titanium lattice that can remain afloat even after damage.

What is new?

RMIT researchers investigated a lightweight titanium lattice geometry intended to retain buoyancy even after damage. The result may address a limitation of porous metal structures that sink once water penetrates them. This is a research demonstration, not a commercially qualified product.

3DPS perspective

Real-world suitability should be evaluated against production, cost and reliability data as these become available.

Source: Original report and cover-image reference.

2026. 10. 14.

ShoeFactory Turns a Phone Foot Scan into a Custom 3D-Printable Shoe

Munich-based Sneakprint has launched ShoeFactory, a service that sells custom-fit STL files rather than finished shoes. Customers scan their feet with a phone browser and print the resulting design themselves.

2026. 09. 28.

Chinese DLP-Printed Metamaterial with Wide Pressure-Sensing Range

A dual-gradient sensor from HUST researchers targets both subtle touch and much larger loads in one structure.

2026. 10. 18.

HEATER CONTROL: from temperature monitoring to visually programmable heating control

HEATER CONTROL began with two temperature sensors and a local display. Its development now includes a browser interface and a checked communication link, with configurable hardware assignment and a block-based rule editor forming the next steps.

2026. 10. 17.

CMF Speakers Support 3D-Printed Knobs and Panels

Nothing’s CMF Speaker S and M support custom 3D-printed replacement panels and knobs.

Earlier news

77 earlier article(s)

Mosaic Orion: Belt 3D Printing for Automated Custom Orthotics

2026. 10. 06.

New printers

Mosaic Orion: Belt 3D Printing for Automated Custom Orthotics

Mosaic’s new Orion system continuously manufactures custom foot orthotics, running different patient jobs one after another without conventional manual batching.

Read

Lightmake L4: Four Fully Independent Toolheads in a Kickstarter Printer

2026. 10. 05.

New printers

Lightmake L4: Four Fully Independent Toolheads in a Kickstarter Printer

The Lightmake L4 combines four independent toolheads with a linear-motor motion system to reduce multi-material waste and cycle time.

Read

KEXCELLED Raises Nearly RMB 100 Million for Chinese 3D Printing Materials

2026. 10. 05.

New materials

KEXCELLED Raises Nearly RMB 100 Million for Chinese 3D Printing Materials

Suzhou-based Nuosibeirui, owner of the KEXCELLED brand, has closed a new funding round while expanding industrial filaments, photopolymer resins and custom material development.

Read

QIDI Smart 5: a compact CoreXY revealed by FCC filings

2026. 10. 04.

New printers

QIDI Smart 5: a compact CoreXY revealed by FCC filings

FCC documents reveal a 180×180×180 mm QIDI Smart 5 for PLA/PETG, with a claimed maximum speed of 600 mm/s.

Read

China Pushes Green-Laser Copper 3D Printing into Batch Production

2026. 10. 03.

Industrial applications

China Pushes Green-Laser Copper 3D Printing into Batch Production

With its new XH-M350G-2HR, Xihe Additive is moving beyond demonstrations: copper cooling components for AI servers and power electronics are entering batch-production applications.

Read

2026. 10. 03.

New printers

Stratasys F870: One-Meter Industrial FDM Already in Toyota and Rivian Workflows

Stratasys’ new F870 combines a 1000 × 610 × 610 mm heated build chamber, Nylon 12CF support and a focus on production tooling, fixtures and factory aids.

Read