3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter
2026. 11. 17.
266

AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter

2 min read

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

Eight materials, eight separate nozzles

The Kickstarter campaign launched on November 12, 2026, highlighting a broader move toward dedicated-head architectures in multicolor FFF printing. AXILOOP MC8 can keep eight materials loaded, each in its own toolhead. The manufacturer advertises approximately four-second exchanges while unused tools remain preheated.

Separate nozzles can reduce contamination and the purging associated with shared-nozzle color changes. However, managing eight heads adds calibration, thermal and maintenance challenges. Longer real-world prints will be needed to establish whether the campaign demonstrations reflect normal use.

Hardware and model differences

Both versions offer a 300 × 300 × 300 mm build volume. AXILOOP specifies up to 300 mm/s printing speed and 600 mm/s travel. The machine is described as having 2,500-point eddy-current bed probing, automatic tool-offset correction, a 1080p camera and 45 sensors. Maximum nozzle temperature is quoted as 300°C.

The open MC8 is aimed at PLA, PETG, TPU and PVA. The enclosed MC8 Pro adds active chamber heating, HEPA and activated-carbon filtration, with support claimed for ABS, ASA, PA, PC and fiber-filled polymers. Differences in bed adhesion and thermal expansion still matter when combining materials.

Crowdfunding conditions and risk

Announced Super Early Bird levels start at $1,099 for MC8 and $1,499 for MC8 Pro. AXILOOP targets March 2027 for first shipments, and the campaign is scheduled to run through December 27. These are pledge conditions, not ordinary in-stock retail prices; shipping, taxes and delivery schedules can change.

Alongside Quadro and Bambu H3C, 3DPS would focus on the repeatability of tool offsets, measured filament waste, firmware sustainability and spare-parts availability. The advertised results should not be mistaken for independent test measurements.

Sources and further information

Original manufacturer source image (AXILOOP): https://www.axiloop3d.com/素材/01.webp

Related articles
Archive

Earlier news

110 earlier article(s)
Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One
Technology
2 714

Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One

Commodore.net has officially relaunched its legendary home computer as the Commodore 64 Ultimate, rebuilding the classic machine on modern FPGA hardware. We cover it here as a curiosity: it has no direct 3D printing angle, since the case is produced with classic injection molding using the original 1986 tooling, not 3D printing.

2026. 10. 01.
Read
LLNL: AI detects defects during 3D printing
Software / AI
2 102

LLNL: AI detects defects during 3D printing

Lawrence Livermore National Laboratory is using camera-based AI inspection to analyze direct ink writing layer by layer and detect defects during the build.

2026. 10. 01.
Read
Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System
New printers
2 809

Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System

Flashforge is positioning the CJ270 as a compact desktop 3D printer designed for high-resolution color printing. According to the manufacturer, the system supports more than 10 million colors and offers a minimum layer thickness of 7 μm. Flashforge is also promoting an additional €450 early-bird benefit for early customers.

2026. 09. 28.
Read
Bambu Lab: construction advances on a planned 3-million-printer Shenzhen hub
IP / legal news
2 623

Bambu Lab: construction advances on a planned 3-million-printer Shenzhen hub

Bambu Lab is taking a major step toward building one of the world's largest 3D printer manufacturing bases. Its planned “3D Printing Intelligent Manufacturing Headquarters Base” in Shenzhen's Guangming District has moved into site-preparation and construction-access work. The complex is designed for an annual capacity of more than 3 million 3D printers and will combine manufacturing with research and development, component production and materials-related activities.

2026. 09. 28.
Read