3DPS logo
3DPS Europe
Service and development
News

News / article

Research
← Back to news Back to homepage
Fraunhofer Shape Dithering: reducing staircase artifacts without new hardware
2026. 11. 16.
70

Fraunhofer Shape Dithering: reducing staircase artifacts without new hardware

2 min read

Fraunhofer IGD has presented Shape Dithering, a geometry-processing method intended to reduce staircase artifacts in voxel-based 3D printing.

Fraunhofer IGD has presented Shape Dithering, a geometry-processing method intended to reduce staircase artifacts in voxel-based 3D printing.

Where staircase artifacts come from

3D printers represent continuous three-dimensional shapes using layers or voxels with finite resolution. Sloped and curved surfaces can therefore develop visible staircase or quantization artifacts that require post-processing. The effect differs between technologies, but geometry discretization is important in many workflows.

According to Fraunhofer IGD’s November 12 release, Shape Dithering redistributes quantization errors in the digital representation of geometry. The institute describes it as a parameter-free, purely geometric method. That matters because reducing the visible artifact does not necessarily require a redesigned toolhead or new motion mechanics; the intervention takes place in the preparation software.

Not the same as sanding a finished part

The method acts on the computational shape before printing. Demonstration images compare propeller surfaces and show reduced stair-stepping relative to conventional voxelization. However, they do not prove identical improvements for every machine or material. Dimensional accuracy, strength and manufacturing time still need testing for each process.

At Formnext 2026, Fraunhofer also plans to show unit-cell design and optimization methods as well as RISTRA-AM distortion simulation. The institute says its GPU-based approach can accelerate selected calculations by one or two orders of magnitude compared with established CPU methods.

Why 3DPS is watching

Software-level geometry processing is another path to better part quality without relying solely on expensive mechanics or smaller layers. Next, the underlying measurement methods and compatibility with different manufacturing processes should be examined. Shape Dithering was not presented as a universal one-click FDM slicer feature.

Sources and further information

Original manufacturer source image (Fraunhofer IGD / IGCV): https://www.igd.fraunhofer.de/en/media-center/news-from-the-institute/2026/reducing-staircase-artifacts-in-3d-printing/jcr:content/fixedContent/pressArticleParsys/textwithinlinedimage/imageComponent1/image.img.jpg/1794467514794/FormNext-Shape-dithering-propeller.jpg

Related articles
Archive

Earlier news

109 earlier article(s)
Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One
Technology
2 681

Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One

Commodore.net has officially relaunched its legendary home computer as the Commodore 64 Ultimate, rebuilding the classic machine on modern FPGA hardware. We cover it here as a curiosity: it has no direct 3D printing angle, since the case is produced with classic injection molding using the original 1986 tooling, not 3D printing.

2026. 10. 01.
Read
LLNL: AI detects defects during 3D printing
Software / AI
2 078

LLNL: AI detects defects during 3D printing

Lawrence Livermore National Laboratory is using camera-based AI inspection to analyze direct ink writing layer by layer and detect defects during the build.

2026. 10. 01.
Read
Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System
New printers
2 797

Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System

Flashforge is positioning the CJ270 as a compact desktop 3D printer designed for high-resolution color printing. According to the manufacturer, the system supports more than 10 million colors and offers a minimum layer thickness of 7 μm. Flashforge is also promoting an additional €450 early-bird benefit for early customers.

2026. 09. 28.
Read
Bambu Lab: construction advances on a planned 3-million-printer Shenzhen hub
IP / legal news
2 575

Bambu Lab: construction advances on a planned 3-million-printer Shenzhen hub

Bambu Lab is taking a major step toward building one of the world's largest 3D printer manufacturing bases. Its planned “3D Printing Intelligent Manufacturing Headquarters Base” in Shenzhen's Guangming District has moved into site-preparation and construction-access work. The complex is designed for an annual capacity of more than 3 million 3D printers and will combine manufacturing with research and development, component production and materials-related activities.

2026. 09. 28.
Read