3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
QIDI Q3D: Dual Nozzles and Air-Cooled Extrusion Debut at Formnext 2026
2026. 11. 16.
322

QIDI Q3D: Dual Nozzles and Air-Cooled Extrusion Debut at Formnext 2026

3 min read

QIDI is teasing the Q3D for Formnext 2026, highlighting dual nozzles, air-cooled extrusion and real-time temperature readouts. Full specifications remain under wraps.

QIDI teases a dual-nozzle 3D printer

The QIDI Q3D is an upcoming 3D printer that the company is teasing ahead of Formnext 2026 in Frankfurt. An earlier manufacturer post announced a dual-nozzle design aimed at greater printing flexibility. Its latest graphic highlights air cooling for the extrusion system and a real-time temperature display.

Potential advantages of a dual-nozzle architecture include working with two colors or materials, or separating support material from the printed part. However, these are potential use cases rather than verified Q3D features: switching mechanisms, material compatibility and the actual extruder configuration have not been fully disclosed.

Unmodified QIDI Q3D manufacturer teaser showing extruder air cooling and two 35 °C temperature readouts
QIDI's original product teaser depicts an air-cooling concept and two 35 °C temperature readouts. Image used unchanged.

Why cool the extrusion system?

In an FDM/FFF printer, the nozzle must be hot enough to melt the polymer, while the filament feed path and the cold side of the hotend need to remain relatively cool. Excess heat creeping upward along the filament path can soften filament before it reaches the intended melt zone. That can lead to inconsistent feeding, jams and clogs — particularly during extended prints or operation in a heated chamber.

The Q3D teaser uses the words “Air Cooling. Extrusion fully under control. Real-time temperature display.” Its cutaway-style graphic shows an air path aimed at the extrusion system. This is significant because cooling the extruder's cold side is not the same thing as cooling the printed layers.

QIDI already documents a separate Polar Cooler product for cooling the extruder cold side and filament feed path. There is no confirmed information that the Q3D uses that exact unit; its cooling arrangement could differ.

What do the 35 °C labels tell us?

The teaser shows 35 °C twice, alongside the labels “E” and “L”. The company has not clarified the exact sensor locations, measurement conditions, control range or whether those readings represent stable performance under load. We therefore treat them as illustrative displayed readings, not a guaranteed temperature specification.

Real-time visibility into extrusion-system temperatures could be useful for diagnosing heat-related feed problems. However, QIDI has yet to confirm whether these readings will drive automated cooling control, alarms or other protective functions.

Five technical questions for the launch

  • Dual nozzles: how are nozzles switched, and are their temperature and material capabilities identical?
  • Filament feeding: what is the arrangement of extruders, feed paths and motors?
  • Cooling: is the air-cooling solution integrated or external, and how does it perform in a heated chamber?
  • Monitoring: where are “E” and “L” measured, and does the temperature display provide closed-loop control?
  • Product details: what are the build volume, pricing and availability?

Formnext 2026: where and when

QIDI plans to reveal more about the Q3D at Formnext 2026, November 17–20, at Messe Frankfurt, Hall 12.1, Booth E01. At the time of this preview, the complete official specification sheet and retail pricing had not been published.

3DPS perspective: pairing dual nozzles with more careful extrusion thermal management could be useful for engineering-material workflows. Whether this offers a measurable advantage will depend on testing for temperature stability, clog resistance, material changes, print quality and long-term reliability. A teaser image is not a substitute for technical specifications or independent benchmarks.

Sources: QIDI air-cooling teaser (November 15, 2026); earlier dual-nozzle teaser (November 12); QIDI Polar Cooler documentation; Formnext exhibitor list. The illustration is an unmodified manufacturer graphic supplied for this article.

Related articles
Archive

Earlier news

109 earlier article(s)
Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One
Technology
2 679

Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One

Commodore.net has officially relaunched its legendary home computer as the Commodore 64 Ultimate, rebuilding the classic machine on modern FPGA hardware. We cover it here as a curiosity: it has no direct 3D printing angle, since the case is produced with classic injection molding using the original 1986 tooling, not 3D printing.

2026. 10. 01.
Read
LLNL: AI detects defects during 3D printing
Software / AI
2 073

LLNL: AI detects defects during 3D printing

Lawrence Livermore National Laboratory is using camera-based AI inspection to analyze direct ink writing layer by layer and detect defects during the build.

2026. 10. 01.
Read
Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System
New printers
2 795

Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System

Flashforge is positioning the CJ270 as a compact desktop 3D printer designed for high-resolution color printing. According to the manufacturer, the system supports more than 10 million colors and offers a minimum layer thickness of 7 μm. Flashforge is also promoting an additional €450 early-bird benefit for early customers.

2026. 09. 28.
Read
Bambu Lab: construction advances on a planned 3-million-printer Shenzhen hub
IP / legal news
2 571

Bambu Lab: construction advances on a planned 3-million-printer Shenzhen hub

Bambu Lab is taking a major step toward building one of the world's largest 3D printer manufacturing bases. Its planned “3D Printing Intelligent Manufacturing Headquarters Base” in Shenzhen's Guangming District has moved into site-preparation and construction-access work. The complex is designed for an annual capacity of more than 3 million 3D printers and will combine manufacturing with research and development, component production and materials-related activities.

2026. 09. 28.
Read