3DPS logo
3DPS Europe
Service and development
HUEN
News

News / article

New printers
← Back to news Back to homepage
Quantum Cyber Completes an 80-Printer “Drone Farm” in Connecticut
2026. 09. 15.
1 314

Quantum Cyber Completes an 80-Printer “Drone Farm” in Connecticut

1 min read

Quantum Cyber has completed installation of an 80-machine 3D printing farm in Connecticut, targeting drone components and related production work.

Quantum Cyber has completed installation of an 80-machine 3D printing farm in Connecticut, targeting drone components and related production work.

What happened?

Quantum Cyber has completed installation of an 80-machine 3D printing farm in Connecticut, targeting drone components and related production work.

Key details

  • The installation consists of 80 3D printers.
  • The project targets scalable drone-related manufacturing.
  • The print-farm model creates flexible capacity through many parallel machines.
  • Capacity can be expanded incrementally by adding additional printers.

Why it matters

Print farms show that desktop and mid-range machines are not limited to hobby use. With proper workflow management, many identical printers can operate as a flexible modular production cell.

The cover image is a 3DPS-created illustration.

Source and further information

This article is a summary based on publicly available source material. Read the original here: 3DPrint.com.



#QuantumCyber #PrintFarm #3DPrintFarm #DroneManufacturing #Drones #UAV #3DPrinting #DistributedManufacturing #DigitalManufacturing #Production #Automation #3DPS
Related articles
Archive

Earlier news

96 earlier article(s)
KPI features have been added.
Technology
1 356

KPI features have been added.

KPI features have been added. CALIBRA – Measurem Why do KPIs matter in measurement equipment management? Because data becomes truly useful only when it helps you see where attention is needed and how performance changes over time.

2026. 08. 24.
Read
CALIBRA – A Free Measurement Equipment Management System Is Under Development
Technology
1 200

CALIBRA – A Free Measurement Equipment Management System Is Under Development

CALIBRA – A Free Measurement Equipment Management System Is Under Development A new in-house developed web application is joining the growing collection of 3DPS projects. CALIBRA is being developed as a modern, transparent and expandable measurement equipment and calibration management system. Development has progressed rapidly from the original concept to an already functioning web application, with the foundations of company management, equipment tracking, external partner management and auditing now in place.

2026. 08. 11.
Read
Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions
Technology
1 262

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

2026. 08. 04.
Read
Parkside Multi Charger – New Development Milestone
Technology
1 020

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

2026. 08. 02.
Read
Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard
New printers
910

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

Anycubic Kobra 3 Toolhead Project – Another Milestone: Successful Firmware Backup and Preparing for a CAN-Based Toolboard Today marked another major milestone in the Anycubic Kobra 3 Toolhead project. Our objective is not to modify or preserve the original firmware. Instead, we are developing a completely custom firmware that will transform the factory controller board into a Klipper-compatible CAN Tool MCU with only minimal hardware modifications.

2026. 07. 27.
Read
Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2
New printers
896

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project The Anycubic Kobra 3 Toolhead reverse engineering project has reached another important milestone. Recent work has shifted beyond simply identifying components toward building a comprehensive and structured hardware documentation system that will serve as the foundation for all future development.

2026. 07. 26.
Read
Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed
New printers
917

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed The reverse engineering project has reached another important milestone. Our recent work has focused not only on identifying individual components but also on building a structured hardware documentation system that will serve as the foundation for mapping the entire electronics assembly.

2026. 07. 26.
Read