AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter
AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.
AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.
Eight materials, eight separate nozzles
The Kickstarter campaign launched on November 12, 2026, highlighting a broader move toward dedicated-head architectures in multicolor FFF printing. AXILOOP MC8 can keep eight materials loaded, each in its own toolhead. The manufacturer advertises approximately four-second exchanges while unused tools remain preheated.
Separate nozzles can reduce contamination and the purging associated with shared-nozzle color changes. However, managing eight heads adds calibration, thermal and maintenance challenges. Longer real-world prints will be needed to establish whether the campaign demonstrations reflect normal use.
Hardware and model differences
Both versions offer a 300 × 300 × 300 mm build volume. AXILOOP specifies up to 300 mm/s printing speed and 600 mm/s travel. The machine is described as having 2,500-point eddy-current bed probing, automatic tool-offset correction, a 1080p camera and 45 sensors. Maximum nozzle temperature is quoted as 300°C.
The open MC8 is aimed at PLA, PETG, TPU and PVA. The enclosed MC8 Pro adds active chamber heating, HEPA and activated-carbon filtration, with support claimed for ABS, ASA, PA, PC and fiber-filled polymers. Differences in bed adhesion and thermal expansion still matter when combining materials.
Crowdfunding conditions and risk
Announced Super Early Bird levels start at $1,099 for MC8 and $1,499 for MC8 Pro. AXILOOP targets March 2027 for first shipments, and the campaign is scheduled to run through December 27. These are pledge conditions, not ordinary in-stock retail prices; shipping, taxes and delivery schedules can change.
Alongside Quadro and Bambu H3C, 3DPS would focus on the repeatability of tool offsets, measured filament waste, firmware sustainability and spare-parts availability. The advertised results should not be mistaken for independent test measurements.
Sources and further information
- https://axiloop3d.com/
- https://www.kickstarter.com/projects/axiloop/axiloop-mc8-8-independent-tool-head-multi-color-3d-printer
- https://www.kickstarter.com/projects/axiloop/axiloop-mc8-8-independent-tool-head-multi-color-3d-printer/faqs
- https://3druck.com/en/printers-and-products/axiloop-mc8-and-mc8-pro-kickstarter-campaign-launched-for-3d-printers-with-eight-toolheads-26165653/
Original manufacturer source image (AXILOOP): https://www.axiloop3d.com/素材/01.webp














